1 Pc. Stenter for Drying and Fixing
Woven- and Knitted Fabrics, brand
BABCOCK, Type Babco- Star 1028 (5011),
older Year of Construction but
permanently overhauled and renewed
(Isolation, Electric, Burners…) totally
and converted from Oil to Gas in 1999
and since used very low, so very good
condition. With 6 Drying Chambers, Long
Entry, Pin and Clip Transport Chain,
working Width 960–330cm,
Speed 4–100m/min.
Equipped with following Devices:
- - MAXON Burner,
- - Control Unit with SIEMENS- SPS Monitor, - - Fixation Pilot,
- - Duration Time Regulator MAHLO,
- - Humidity Control PLEVA FS91- 200,
- - Weft Straightener MAHLO type RFMC- 10
Orthomat,
- - Optical Edge Sensors ERHARD & LEIMER, - - Edge unwinders for Web and Knitted
Fabrics,
- - Edge Stripe TANDEMATIC Special for
Knitted Fabric,
- - Width Adjusting Device ERHARD & LEIMER
Type KF 2020,
- - 3- Rollers Foulard, KÜSTERS, Type 51,
width 3200mm, renewal in 1999
- - Preparation Station with Mixer,
consisting of 3 Stainless Steel Tanks
(1x1000, 2x500 liters)
- - Cutting device with Ultrasonic Cutting
device Type RINCO RL35 for Cutting and
Welding the Edges on the Stenter
- - Fans: WITT & SOHN S- RSZ10A/630/800/1,
V m3/h 20000, kW 5.47 frequency
controlled,
- - Exhaust Air system: LANDGRAF with
deflection via exhaust gas scrubber or
directly into the Exhaust Air Chimney.
Length of Entry Field: 3450 mm,
Entry Field extension: 1500 mm
Length of Outlet Field: 2500 mm
Dryer Width: 4820 mm
Length of Dryer: 18500mm
Height of the Dryer:1880 mm without
aerator

Machine is still working and can bee seen in the same. Condition is very good.